90 mm x 190 mm x 57,531 mm ISO JHH221436/13 tapered roller bearings

L1:61 mm; s1:15.5 mm; SW:3.18 mm; L3:51 mm; P:150 mm; N1:16 mm; A:32 mm; S:12.7 mm; d:19.05 mm; Designation of housing:T204-;

A1:15 mm; N:18mm; d:55 mm; A2:64.5 mm; A:48.5 mm; Z:68.6 mm; C0:29.2 kN; J:130 mm; C:43.55 kN; e:31 mm;

C0:7.88 kN; G:M6x1; N:16mm; A2:35.7 mm; J:99 mm; L:68 mm; A1:13 mm; T max.:100 °C; Designation of bearing:UC205-15G2L3; Designation of housing:FL205N-;

e:19 mm; B1:30.9 mm; Designation of bearing:ES204G2T20; J:63.5 mm; T min.:-20 °C; A1:10 mm; Dz:54 mm; G:R1/8"; A:29.5 mm; T max.:200 °C;

Characteristic inner ring frequency, BPFI:4.86 Hz; Brand:NTN; f0:13.6; Mass:0.04 kg; Characteristic rolling element frequency, BSF:4.47 Hz; Characteristic cage frequency, FTF:0.39 Hz; ra max:0.3 mm; Radial clearance class:C3; Max operating temperature, Tmax:110 °C; Characteristic outer ring frequenc

T min.:-20 °C; A1:31 mm; N:17mm; L1:54 mm; T max.:100 °C; Designation of housing:P207N-; d:35 mm; Designation of bearing:US207G2; B:32 mm; G:M6x1;

J:150 mm; Designation of housing:FC211-; A2:46.5 mm; S:11.8 mm; B:45.3 mm; A4:30 mm; e:13 mm; C:43.55 kN; Designation of bearing:US211G2T20; Weight:3.87 kg;

A2:78.5 mm; H:275 mm; G:M10x1; d:76.2 mm; Designation of housing:FL215-; Weight:5.33 kg; C:66 kN; e:34 mm; T min.:-20 °C; Recommended tightening torque for set screw:27.1 Nm;

A:21 mm; Weight:1.31 kg; s1:21.45 mm; N:11,5mm; J:110 mm; A2:26.4 mm; G:M6x1; C:25.7 kN; L:135 mm; Designation of bearing:UC207-21G2L4;

s1:30.5 mm; A4:20.5 mm; A1:6 mm; N:12mm; Designation of housing:FC204N-; Z:46.2 mm; J:78 mm; Recommended tightening torque for set screw:5.5 Nm; e:10 mm; A:25.5 mm;

Ship Weight:3.827 LB; Shaft Attachment (2):D-Lock; d:1.4375 in; Manufacturing Plant Location:Rogersville, TN; UPC:782475891047; End Cap Groove:Yes; Anti-Rotation Pin:Yes; Bearing Series:207 Series; Bearing Outer Ring Material:Steel; Housing Type:2 Bolt Pillow Block;

A1:12 mm; N:10mm; T max.:100 °C; d:17.46 mm; A2:41.5 mm; G:M6x1; Recommended tightening torque for set screw:3.7 Nm; J:78 mm; L:60 mm; H:102 mm;

L1:87 mm; Recommended tightening torque for set screw:8 Nm; N2:49 mm; B:41.2 mm; C:31.85 kN; L:144 mm; H2:83 mm; T min.:-20 °C; G:M6x1; C0:20.8 kN;

Designation of bearing:SUC205-16; C0:8 kN; Weight:0.62 kg; Designation of housing:SFL205N-; L:68 mm; S:14.3 mm; T min.:-20 °C; C:11 kN; Recommended tightening torque for set screw:3.9 Nm; Z:23.5 mm;

rs min:2.1 mm; Brand:SNR; Fatigue limit load, Cu:113 kN; b:13.2 mm; Characteristic cage frequency, FTF:0.44 Hz; d2:203.6 mm; Static load, C0:1,450 kN; Nref:2,000 rpm; Mass:16.9 kg; da min:190.2 mm;